{"id":13846,"date":"2026-08-25T06:19:36","date_gmt":"2026-08-25T06:19:36","guid":{"rendered":"https:\/\/alumnijmmc.org\/?p=13846"},"modified":"2026-08-25T06:19:36","modified_gmt":"2026-08-25T06:19:36","slug":"what-exactly-is-a-forced-reset-trigger-and-how-does-it-work","status":"publish","type":"post","link":"https:\/\/alumnijmmc.org\/index.php\/2026\/08\/25\/what-exactly-is-a-forced-reset-trigger-and-how-does-it-work\/","title":{"rendered":"What Exactly Is a Forced Reset Trigger and How Does It Work?"},"content":{"rendered":"<p>Understanding the Forced Reset Trigger and How It Works<\/p>\n<p>A <strong>forced reset trigger<\/strong> is a firearm trigger system that mechanically cyclically re-engages the sear after every shot, using the bolt carrier\u2019s rearward momentum to reset the trigger without the shooter releasing it. Unlike binary or full-auto systems, it does not fire on the release stroke\u2014instead, it requires the shooter to maintain constant forward pressure, while the trigger\u2019s internal spring and cam mechanism automatically position the sear for the next discharge. Its primary benefit is a significantly faster follow-up shot cadence, achieved without altering the firearm\u2019s internal firing mechanism or requiring any modification to the lower receiver. To use it, the shooter simply holds the trigger to the rear and applies continuous pull pressure, allowing the bolt\u2019s recoil energy to cycle the trigger and deliver each successive shot until pressure is released.<\/p>\n<h2>What Exactly Is a Forced Reset Trigger and How Does It Work?<\/h2>\n<p>A <strong>forced reset trigger<\/strong> is a mechanical replacement for a semi-auto firearm\u2019s standard trigger group that uses the weapon\u2019s recoil energy to physically push the trigger forward, resetting it before the shooter\u2019s finger can finish its rearward pull. Unlike binary or full-auto systems, it does not use a sear-trip or a cam to fire automatically; the shooter must still initiate every shot. How it works: after the hammer falls, the bolt carrier travels rearward and strikes a lever or rod inside the trigger housing, which forcibly shoves the trigger shoe forward against your finger. This returns the sear to its ready position instantly. The shooter then simply relaxes the trigger finger only slightly; the forward-moving trigger meets the stationary finger, which allows the next shot to break as soon as the bolt returns into battery. The result is a theoretical cyclic rate near full-auto, but only because the mechanism harnesses recoil\u2014not stored energy\u2014to accelerate the trigger\u2019s reset cycle.<\/p>\n<blockquote><p>Your trigger finger never fully releases; you merely stop resisting the forward push, which <a href=\"https:\/\/rarebreedtriggertx.com\/product-category\/rare-breed-triggers\/\">rare breed mp5 frt<\/a> is what makes the reset feel like a rapid pulse.<\/p><\/blockquote>\n<h3>The Mechanical Difference Between a Standard Trigger and a FRT<\/h3>\n<p>A standard trigger uses a single sear surface to hold the hammer until the trigger is pulled. In contrast, a <strong>forced reset trigger mechanism<\/strong> adds a secondary cam or lever that actively pushes the trigger forward after the bolt cycles. This forward motion resets the sear contact without requiring the shooter to release the trigger manually. The standard trigger relies on a spring to return the trigger, but the FRT\u2019s mechanical linkage overrides that spring\u2019s timing. Consequently, the trigger pull weight and travel distance change, as the reset occurs earlier and with less shooter input. The bolt\u2019s rearward travel directly drives the reset, creating a distinct, shorter trigger cycle compared to the passive, shooter-dependent reset of a standard design.<\/p>\n<blockquote><p>The key difference is that a standard trigger resets passively via spring force, while an FRT uses bolt energy to mechanically force the trigger forward, shortening the reset cycle.<\/p><\/blockquote>\n<div style=\"text-align:center\">\n<iframe width=\"561\" height=\"319\" src=\"https:\/\/www.youtube.com\/embed\/APldBVKuIk8\" frameborder=\"0\" alt=\"forced reset trigger\" allowfullscreen><\/iframe>\n<\/div>\n<h3>Understanding the Reset Phase: Where the &#8220;Forced&#8221; Action Happens<\/h3>\n<p>The reset phase is the mechanical heartbeat of a forced reset trigger, where the <strong>forced trigger reset<\/strong> physically recocks the hammer without shooter input. After the hammer strikes the firing pin, the bolt carrier group\u2019s rearward travel collides with the trigger\u2019s reset lug, pushing the sear surface back into engagement. This motion compresses the trigger spring and forces the trigger blade forward, bypassing the shooter\u2019s finger entirely. The sequence is precise: first, the carrier\u2019s rearward momentum contacts the lug; second, the lug pivots the trigger downward; third, the disconnector releases the hammer, which then rides forward as the carrier returns, readying the next shot. Any timing mismatch here causes short-stroking or hammer-follow, emphasizing that the reset phase is entirely carrier-driven, not user-driven.<\/p>\n<h3>Why It Feels Like Full-Auto Without Being Full-Auto<\/h3>\n<p>The sensation of full-auto emerges because the <strong>forced reset trigger<\/strong> converts recoil energy into a mechanical cycle that re-cocks the hammer instantly, eliminating the shooter\u2019s need to release the trigger. In a true full-auto, the sear stays disengaged until the bolt cycles; here, the trigger physically slams forward under spring tension before the bolt even finishes its rearward travel. This overlap\u2014trigger reset occurring while the action is still reciprocating\u2014creates a firing cadence of 700\u2013900 rounds per minute, matching full-auto\u2019s rhythm. The shooter perceives continuous fire because the trigger\u2019s forward return is faster than their own finger\u2019s passive relaxation. Each pull begins before the prior shot\u2019s recoil fully dissipates, so the cyclic rate feels identical to a select-fire weapon, though the hammer still falls on a single-shot basis per trigger depression.<\/p>\n<h2>How to Install and Tune Your Trigger for Reliable Performance<\/h2>\n<p>For a <strong>forced reset trigger<\/strong>, start by ensuring the receiver pocket is completely clean and free of debris, as any grit will cause binding. Drop the unit in, then hand-tighten the hammer and trigger pins, checking that the safety selector rotates freely without drag. Tuning begins with the disconnector spring tension; too much force causes the bolt to stall, while too little leads to hammer follow. Cycle the action slowly by hand first, then test-fire with the upper upside down to watch for the reset. If the trigger fails to reset, reduce the buffer weight or increase the spring rate. Adjust the over-travel screw only after the trigger resets consistently, backing it out half a turn to prevent dead-trigger conditions. For <strong>reliable performance<\/strong>, always lock-tite the adjustment screws and re-check the reset after every 50 rounds.<\/p>\n<h3>Tools and Torque Specs Needed for a Proper Drop-In Fit<\/h3>\n<p>For a proper drop-in fit of your forced reset trigger, you\u2019ll need a bench block, a roll pin punch set (3\/32\u201d and 1\/8\u201d are typical), a nylon or brass hammer, and a vise with soft jaws to stabilize the lower receiver. <strong>Use an inch-pound torque wrench<\/strong> with a hex bit for any set screws\u2014most drop-in housings specify 15\u201320 in-lbs for the trigger pin retention screw, never exceeding 25 in-lbs to avoid distorting the housing. The hammer and trigger pivot pins should be installed hand-tight, then torqued to 0 in-lbs (snug only) if they use tension screws; some units require 10 in-lbs on the safety detent screw. Verify the trigger bow clearance with feeler gauges (0.005\u201d\u20130.010\u201d) before torquing the rear takedown pin lug. Re-check all <a href=\"https:\/\/rarebreedtriggertx.com\/\">rare breed trigger<\/a> fasteners after 50 dry-fires.<\/p>\n<blockquote><p>Proper drop-in fit relies on a 3\/32\u201d punch set, soft-jaw vise, and an inch-pound torque wrench set to 15\u201320 in-lbs for retention screws, with pins snug-only to prevent housing stress.<\/p><\/blockquote>\n<h3>Adjusting Spring Tension to Match Your Rifle\u2019s Buffer Weight<\/h3>\n<p>Matching your forced reset trigger\u2019s spring tension to the buffer weight is critical for consistent bolt cycling. Heavier buffers (H2\/H3) require increased hammer or sear spring preload to ensure the trigger resets before the bolt returns to battery, preventing short-strokes. Lighter carbine buffers need reduced tension to avoid hammer follow or premature disconnector release. Use the trigger\u2019s adjustment screws to add or remove spring compression in \u00bc-turn increments, then test with three rounds in semi-auto; if the trigger fails to reset, increase tension. Conversely, if the bolt overrides the hammer, decrease tension. <strong>Proper spring tension alignment<\/strong> eliminates misfeeds and uncontrolled full-auto bursts. Always verify the disconnector fully engages before live-fire testing.<\/p>\n<p><strong>Q: How do I know if my spring tension is mismatched to my buffer weight?<\/strong><br \/>A: If you experience trigger reset failure (trigger stays dead after firing) or hammer-follow (bolt catches hammer prematurely), your spring tension is too low or high for the buffer weight. Adjust in small increments until the trigger audibly clicks forward after each shot.<\/p>\n<h3>Common Installation Mistakes That Cause Misfires or Double-Taps<\/h3>\n<p>When dialing in a <strong>forced reset trigger reliability setup<\/strong>, most double-taps and misfires trace back to a handful of installation slip-ups. If you over-torque the hammer spring screw, the sear can\u2019t reset fully, causing a dead trigger that feels like a misfire. Conversely, leaving the disconnector spring too loose lets the hammer follow the bolt, producing unintended double-taps. Also, misaligning the trigger shoe\u2019s cam lobe against the bolt carrier\u2014even by a millimeter\u2014delays the reset cycle, so you get a split-fire instead of a clean forced reset. Finally, forgetting to apply thread locker on the adjustment screws lets vibration shift your tuning mid-session, turning a perfect setup into sporadic doubles. Always verify the carrier clears the trip lever before firing.<\/p>\n<p><img decoding=\"async\" class='aligncenter' style='display: block;margin-left:auto;margin-right:auto;' width=\"606px\" alt=\"forced reset trigger\" src=\"https:\/\/i.ytimg.com\/vi\/oSXqS-TKG90\/hqdefault.jpg\"\/><\/p>\n<h2>What Gains Will You Actually See at the Range?<\/h2>\n<p>At the range, a forced reset trigger\u2019s primary gain is a dramatically shortened split time between shots, as the trigger mechanically returns forward before your finger finishes its rearward pull\u2014enabling you to break the next shot with a crisp, predictable reset that feels nearly instant. You will see tighter shot groups on rapid strings because the consistent, fixed reset point eliminates the tendency to slap or stage the trigger, letting you maintain a stable grip and sight picture through sustained <a href=\"https:\/\/rarebreedtriggertx.com\/product\/frt-15-l3-trigger\/\">frt-15l3<\/a> fire. <strong>The most tangible benefit is reduced shooter-induced muzzle dip<\/strong>, since the reset\u2019s positive stop prevents the subtle over-travel that typically drags your front sight off target during fast doubles. <strong>Your cadence control improves markedly<\/strong>, allowing you to fire at a pace that mimics a bump-fire but with far less movement\u2014your support hand and stance stay locked, so you\u2019ll notice less fatigue over a 200-round session. <em>However, the gain is only as good as your grip: if you let the stock slip or your trigger finger tense up, the forced reset\u2019s speed will amplify those flaws rather than hide them.<\/em> Expect a flatter, faster, and more repeatable shooting experience, but not magic\u2014your follow-through still dictates precision.<\/p>\n<h3>Practical Accuracy: Controlling Rapid Fire Without Losing Your Sight Picture<\/h3>\n<p><img decoding=\"async\" class='aligncenter' style='display: block;margin-left:auto;margin-right:auto;' width=\"601px\" alt=\"forced reset trigger\" src=\"https:\/\/i.ytimg.com\/vi\/WQ69YIp58co\/hqdefault.jpg\"\/><\/p>\n<p>With a forced reset trigger, your practical accuracy hinges on reacquiring the front sight between each shot cycle, not on fighting the trigger\u2019s reset. The shooter who maintains a <strong>stable sight picture under rapid fire<\/strong> will see tighter groups because the forced reset\u2019s short, predictable return allows you to time your next press to the exact moment the post aligns with the target. Muzzle rise becomes a controlled variable\u2014you monitor the front sight\u2019s arc, let it settle naturally, and fire as it dips back into the notch. This reduces the tendency to jerk or anticipate, as your focus stays on visual confirmation rather than trigger mechanics. The result is faster split times without the typical spread widening, provided you resist the urge to fire before the post returns to its zero point.<\/p>\n<p><img decoding=\"async\" class='aligncenter' style='display: block;margin-left:auto;margin-right:auto;' width=\"603px\" alt=\"forced reset trigger\" src=\"https:\/\/i.ytimg.com\/vi\/5248FoD13nM\/hqdefault.jpg\"\/><\/p>\n<p><strong>Q: How do I keep my sight picture from blurring during a 3-round burst with a forced reset trigger?<\/strong><br \/>A: Keep your grip pressure at 70% on the support hand and track the front sight\u2019s rebound\u2014don\u2019t chase it. Let the trigger reset passively as the muzzle drops, then press the moment the post sits level with your rear notch. Practice in pairs, not mag dumps, to build muscle memory for that precise reacquisition window.<\/p>\n<h3>Trigger Pull Weight and Travel Reduction for Faster Follow-Up Shots<\/h3>\n<p>The most immediate, measurable gain from a forced reset trigger is the dramatic reduction in both trigger pull weight and total travel distance. Because the trigger mechanism physically resets the sear under spring pressure, you never have to manage a long, heavy trigger break. Instead, the pull weight becomes consistently light\u2014often under three pounds\u2014while the reset travel shrinks to a fraction of a millimeter. This creates a <strong>faster follow-up shot cycle<\/strong> because your finger never leaves the trigger shoe, and the necessary movement for the next break is nearly imperceptible. Consequently, you maintain a constant firing grip and avoid the natural tendency to \u201cslap\u201d the trigger during rapid fire, which usually disrupts sight alignment. The sequence becomes: (1) the shot breaks, (2) the bolt or carrier forces the trigger forward into a pre-set state, (3) your finger only needs a short, crisp press to fire again\u2014eliminating the traditional stop-and-wait for a long trigger reset.<\/p>\n<h3>Recoil Management Tips to Maximize Your Second and Third Rounds<\/h3>\n<p>To maximize your second and third rounds with a forced reset trigger, shift your grip pressure <a href=\"https:\/\/rarebreedtriggertx.com\/product\/fn-m249s-binary-trigger-for-sale\/\">m249s binary trigger<\/a> forward and lock your support wrist to counter the bolt\u2019s violent return. Keep your upper body leaning into the rifle, absorbing recoil through your shoulders rather than your arms; this prevents muzzle climb from stealing your sight picture. For rapid follow-ups, exhale fully before the first shot, then ride the reset with a flat, consistent trigger pull\u2014don\u2019t slap it. Focus on the front sight through the entire cycle, letting the <strong>forced reset trigger\u2019s short recovery window<\/strong> guide your cadence, not your flinch response. Dry-fire practice with a loaded magazine will train your muscles to stay on target.<\/p>\n<h2>How to Choose the Right FRT Kit for Your AR-15 or Pistol Caliber Build<\/h2>\n<p>Choosing the right <strong>forced reset trigger kit<\/strong> for your AR-15 or pistol caliber build starts with matching the bolt carrier group (BCG) mass and recoil impulse to the kit\u2019s design parameters. Heavy buffers or suppressed setups require kits tuned for increased backpressure, or you risk short-stroking and slam-fires. For pistol calibers (9mm, .300 BLK), select a kit specifically rated for that platform, as the trigger\u2019s reset cam geometry differs from rifle cartridges to handle the shorter bolt travel. Verify your lower receiver\u2019s hammer pin spacing and trigger pocket depth\u2014some billet lowers need minor fitting. Always check that the kit\u2019s disconnector profile is compatible with your firing pin retention, especially for lightweight BCGs. Prioritize kits with adjustable spring tension for your specific gas system length; a mid-length gas system on a 16-inch barrel may require a stiffer reset spring than a carbine-length setup.<\/p>\n<h3>Matching the FRT Design to Your Fire Control Pocket (Semi vs. Full Profile)<\/h3>\n<p>Matching the FRT design to your fire control pocket is non-negotiable for reliable function. A **semi-profile FRT** fits standard mil-spec lower receivers with the rear shelf intact, whereas a full-profile unit requires a pocket milled to accept the enlarged trigger cassette. Before purchasing, measure your lower\u2019s pocket depth and rear wall thickness\u2014full-profile models often bind in tight anodized pockets, causing trigger reset failures. Semi-profile units drop into most forged lowers without modification, but polymer pistol-caliber frames may need minor reinforcement to prevent flex under spring tension. Always test with your upper installed, since buffer weight and bolt carrier geometry alter how the FRT\u2019s sear engages. Choose full-profile only if your receiver is explicitly cut for it; otherwise, stick to semi-profile for drop-in simplicity and consistent hammer strike.<\/p>\n<ul>\n<li>Verify receiver pocket depth against FRT trigger cassette height before ordering.<\/li>\n<li>Semi-profile suits standard AR-15 lowers; full-profile demands a dedicated cut or billet upper.<\/li>\n<li>Check rear shelf clearance for semi-profile reset linkage travel.<\/li>\n<li>For pistol calibers, confirm the frame\u2019s trigger slot width matches the FRT\u2019s side rails.<\/li>\n<\/ul>\n<h3>Drop-In vs. DIY Conversion: Pros, Cons, and Skill Level Required<\/h3>\n<p><img decoding=\"async\" class='aligncenter' style='display: block;margin-left:auto;margin-right:auto;' width=\"603px\" alt=\"forced reset trigger\" src=\"https:\/\/i.ytimg.com\/vi\/xgqZdByDLJ0\/hqdefault.jpg\"\/><\/p>\n<p>Choosing between a drop-in forced reset trigger and a DIY conversion hinges on your mechanical aptitude and tolerance for troubleshooting. A <strong>drop-in forced reset trigger<\/strong> offers verified reliability, precise reset tuning, and warranty support, but costs significantly more. The DIY route, typically modifying an existing trigger with a replacement sear or cam, is cheaper and lets you tailor pull weight, yet demands filing, fitting, and iterative testing to avoid hammer follow or slam-fires. Skill-wise, drop-in requires only basic pins-and-springs familiarity, while <a href=\"https:\/\/rarebreedtriggertx.com\/product-category\/super-safety-trigger\/\">forced reset trigger super safety<\/a> DIY demands gunsmithing confidence, a bench vise, and patience for stone-polishing contact surfaces. <em>Misjudging sear geometry on a DIY kit can render the lower receiver unsafe, not just nonfunctional.<\/em> Ultimately, novices should buy drop-in, while experienced builders can justify the labor savings of DIY.<\/p>\n<h3>Reliability Upgrades: Enhanced Hammer Springs, Anti-Walk Pins, and Oil Points<\/h3>\n<p>For a forced reset trigger, <strong>reliability upgrades hinge on three mechanical fixes<\/strong>. First, replace the factory hammer spring with an enhanced, heavier unit\u2014this ensures the hammer\u2019s reset force overcomes the trigger\u2019s friction during rapid cycling, preventing light strikes or hang-ups. Second, install anti-walk pins on the hammer and trigger; FRT\u2019s violent reciprocation can shear standard pins, causing trigger misalignment and slam-fires. Finally, identify the oil points: apply a thin grease to the hammer pivot, trigger sear, and the FRT\u2019s internal cam track. These three actions eliminate most stoppages. Follow this sequence: swap the spring, torque the anti-walk pins, then lube the contact surfaces before your first live-fire test.<\/p>\n<h2>Your Top 7 Questions About Forced Reset Triggers, Answered<\/h2>\n<p>A forced reset trigger (FRT) lets you fire as fast as you can pull the trigger, but it doesn\u2019t use the recoil energy like a binary or full-auto system. The top questions usually start with legality and compatibility\u2014yes, it\u2019s legal in most states, but it must be installed on a semi-auto firearm with a standard bolt carrier group, not a lightweight one. You\u2019ll also want to know that the trigger resets by the bolt\u2019s forward motion, so your finger must stay perfectly still during the reset. <strong>Lube matters more than you think<\/strong>\u2014a dry gun will cause sluggish resets. Another common question is whether it works with a bump stock\u2014no, they\u2019re separate systems, and you don\u2019t need one. <strong>Trigger discipline is non-negotiable<\/strong> because the reset is so short that a flinch can cause a double shot. Expect a learning curve of about 200 rounds before your speed feels natural. <em>Most malfunctions stem from grip tension, not the trigger itself.<\/em> Finally, always use a hammer-forged bolt for durability, as the stress cycles are higher than a standard trigger.<\/p>\n<h3>Will a Lighter Buffer Spring Fix Double-Feeds or Bolt Bounce?<\/h3>\n<p>Swapping to a lighter buffer spring won\u2019t reliably cure double-feeds or bolt bounce with a forced reset trigger\u2014it can actually make them worse. <strong>Correct buffer weight tuning<\/strong> matters more than spring rate. A lighter spring lets the bolt slam back harder and rebound faster, increasing bounce before the trigger resets. Double-feeds usually come from timing mismatches, not spring tension. Instead, try a heavier buffer or an adjustable gas block first. If you still see bounce, check your trigger\u2019s disconnector engagement. A simple sequence: <\/p>\n<ol>\n<li>Test with your current spring and a heavier buffer.<\/li>\n<li>Reduce gas until ejection is consistent.<\/li>\n<li>Only then test a lighter spring, monitoring bolt bounce on high-speed video.<\/li>\n<\/ol>\n<p>You\u2019ll likely find the spring wasn\u2019t the problem.<\/p>\n<h3>Can I Use a FRT for Competition Shooting Without Penalty?<\/h3>\n<p>Using a <strong>forced reset trigger in competition<\/strong> mostly comes down to your specific match\u2019s rulebook, not the trigger itself. Most practical shooting sports like USPSA or IDPA ban binary or full-auto features, but a true FRT fires one round per trigger pull\u2014so it often slips into \u201cOpen\u201d division without penalty. However, some clubs explicitly list FRTs under prohibited \u201crapid-fire devices.\u201d Before registering, check the division rules online or ask the match director directly. If allowed, you\u2019ll likely face no scoring penalty, but you might draw extra scrutiny during a chrono or equipment check. Practice your reset timing first\u2014it changes your double-tap rhythm. If the match says no, you\u2019ll simply have to swap to a standard trigger for that day.<\/p>\n<h3>What Maintenance Routine Keeps the Reset Crisp for 10,000+ Rounds?<\/h3>\n<p>The secret to a crisp reset past 10,000 rounds is a **strict, interval-based cleaning routine** focused on the trigger pack\u2019s sear engagement surfaces. Wipe the trigger group\u2019s hammer and disconnecter faces with a dry cloth after every 500\u2013800 rounds to remove carbon fouling before it hardens into gritty paste. Apply one drop of thin synthetic oil\u2014never grease\u2014to the reset cam and spring channel every 1,000 rounds; excess viscosity slows the bolt\u2019s return stroke. <em>Most reset degradation comes from powder residue baking onto the sear notch, not from worn parts.<\/em> Replace the return spring at the 5,000-round mark preemptively, as fatigue alters timing. Avoid over-lubricating the carrier rails, which attracts debris into the reset mechanism. Q: <strong>What maintenance routine keeps the reset crisp for 10,000+ rounds?<\/strong> A: Dry-wipe the sear surfaces every 500 rounds, re-oil the cam channel every 1,000, and swap the return spring at 5,000\u2014this prevents friction creep and maintains the trigger\u2019s tactile snap.<\/p>\n<h3>How to Diagnose a &#8220;Dead Trigger&#8221; on the Range in Under 30 Seconds<\/h3>\n<p>When your forced reset trigger goes &#8220;dead,&#8221; stop firing immediately and run this 30-second diagnostic. First, <strong>check the hammer fall position<\/strong>\u2014if it\u2019s resting forward against the bolt, the trigger\u2019s reset lug didn\u2019t re-engage, indicating a bind in the disconnector track. Second, inspect the selector\u2019s position; a partially rotated switch can block the reset cam from returning. Third, pull the trigger rearward and release slowly, feeling for grit or a hard stop at the halfway point\u2014that signals debris or carbon in the reset <a href=\"https:\/\/rarebreedtriggertx.com\/product\/fn-scar-trigger-for-fn-scar-series\/\">scar frt trigger<\/a> channel. If the trigger stays dead after these steps, drop the upper and look for a broken return spring or a dislodged anti-walk pin. <mark>Reset cam alignment<\/mark> is the final culprit: tilt the lower forward\u2014if you hear a faint click, the cam was simply over-rotated and needs a manual nudge. Time yourself; thirty seconds is enough to rule out mechanical obstruction before field-stripping.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Understanding the Forced Reset Trigger and How It Works A forced reset trigger is a firearm trigger system that mechanically [&hellip;]<\/p>\n","protected":false},"author":6,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[1],"tags":[],"class_list":["post-13846","post","type-post","status-publish","format-standard","hentry","category-news"],"acf":[],"_links":{"self":[{"href":"https:\/\/alumnijmmc.org\/index.php\/wp-json\/wp\/v2\/posts\/13846","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/alumnijmmc.org\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/alumnijmmc.org\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/alumnijmmc.org\/index.php\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/alumnijmmc.org\/index.php\/wp-json\/wp\/v2\/comments?post=13846"}],"version-history":[{"count":1,"href":"https:\/\/alumnijmmc.org\/index.php\/wp-json\/wp\/v2\/posts\/13846\/revisions"}],"predecessor-version":[{"id":13847,"href":"https:\/\/alumnijmmc.org\/index.php\/wp-json\/wp\/v2\/posts\/13846\/revisions\/13847"}],"wp:attachment":[{"href":"https:\/\/alumnijmmc.org\/index.php\/wp-json\/wp\/v2\/media?parent=13846"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/alumnijmmc.org\/index.php\/wp-json\/wp\/v2\/categories?post=13846"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/alumnijmmc.org\/index.php\/wp-json\/wp\/v2\/tags?post=13846"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}